MILLIY TREK PRO

Automatic traffic enforcement system

All-in-one system

«Milliy Trek Pro» Automatic traffic enforcement system

The system is designed for automatic photo and video recording of traffic violations in various modes (portable, mobile, stationary) and transmission of data on recorded violations in real time to the Police Back Office.

The possibility of capturing the certain violations depends on the chosen location and operation mode of the system.

  • Speeding (instant and average)
  • Movement in the wrong direction on two-way road
  • Movement in the wrong direction on one-way road
  • Movement on divider lane.
  • Movement on reserved bus lane.
  • Movement on the roadside.
  • Movement on pavement or cycle way.
  • Crossing the solid road marking.
  • Truck traffic ban enforcement.
  • Truck movement on the leftmost lane.
  • Driving under the STOP sign without stopping.
  • Failure to keep safe distance (tailgating)

Note:
* It is possible to use the average speed control mode on a road section, when working together with other “Milliy Trek” family systems. 

Versatility - quick switching between stationary, mobile and portable modes of operation.

"Milliy Trek Pro” System, depending on the selected mode, can be mounted on a stationary pole bracket, or on a tripod. Configuration is performed remotely via the Web interface or at the installation site using a mobile computer.

The time required for initial setup has been reduced significantly. Interactive indicators have been introduced into the interface that display the setup and give recommendations for correcting the position of the sensor. Moreover, the system starts capturing of traffic violations only if it is correctly oriented and has passed self-diagnosis tests.

The system automatically captures traffic violations in the control zone and forms the necessary evidence base for each target: overview photographs, photographs with a visually distinguishable license plate, video recordings of each violation, etc. At the same time, continuous video recording of events in the control zone of the system is carried out.

It is possible to use the average speed control mode on a road section between two or more Milliy Trek- or Cordon-family systems.

The system classifies vehicles into main categories (cars, trucks, buses). Classification is performed by an optical method without recourse to any databases. This allows you to automatically capture violations of truck traffic ban, as well as automatically assign a speed limit according to traffic rules corresponding to the vehicle category. 

SYSTEM OPERATION IN MOTION

A unique feature of "Milliy Trek Pro" system is the possibility of installation on a patrol car for operation on the move.

During the patrolling, the system automatically measures its own speed and the speed of vehicles in the control zone by means of radar. At the same time, their license plates are recognized. To correctly determine the allowed speed threshold when working on the move, the pre-generated electronic map with assigned coordinates of speed limit areas is loaded into the memory of the system. The map is edited by the administrator.

Based on metrologically reliable data, the system automatically detects speed violators and instantly transmits the recorded data to the Police Back Office. 

Operating modes and equipment

"Milliy Trek Pro" systems benefit from several possible ways of installation and power connection, depending on the tasks to be solved and the technical capabilities in the controlled areas. When ordering, you can select the required installation and maintenance kit.

Using the 220 V mains power supply
A set with a mounting bracket for a lighting pole with a connection to 220 V power line. It is installed next to the road at a height of up to 10 meters. Installation above the road or the median strip of the road is also allowed.

Using the power from lighting network
Pole mounting kit with BPF power unit for connection to the lighting network, which only operates at night. The battery is constantly connected to the street lighting network through the BPF24/220 unit, which ensures its recharging at night and daytime operation from the battery.

Milliy Trek Pro

Tripod installation
Setup on tripod with battery box. The kit may include a tablet or laptop. The sensor is installed on the side of the road and connected to the battery box.

Installation in a car
The sensor installed in the rear seat or in the trunk of a car can be used not only in mobile, but also in portable (immobile) mode. If necessary, the patrol car can be parked in desired place and system is quickly switched to portable mode.

Car roof installation
Car roof mounting kit. The kit also includes a battery box and a laptop.

Milliy Trek Pro передвижной

"S-Auto" Set
Kit for installation in hatchback, minibus, SUV or station wagon vehicles. The sensor is installed in the trunk of a patrol car on a mini tripod with additional bracings to ensure rigidity and reliability.

"D-Auto" Set
Kit for installation of the sensor inside the passenger car. The sensor is mounted on the rear seat using the specialized bracket, headrest adapter and standard ISOFIX mounts. The set takes into account the design features of the Customer's car (car make and model shall be specified when ordering).

Both kits include the battery box for powering the system and an operator’s tablet. To install the sensor, it is not required to make any changes and modifications to the vehicle design.
Installation of the system in both versions takes no more than 5 minutes.

Milliy Trek Pro мобильный

Текст

Specifications

PARAMETERVALUE
Measuring speed range2 — 300 km/h
Speed measurement accuracy ± 1,0 km/h
Operating radiation frequency from 24.05 to 24.25 GHz
Internal time scale synchronization accuracy with UTC(SU) ± 5 µs
Power consumption (at positive temperatures) than 25 W
Sensor weight no more than 6.0 kg

Certificates 

Certificate of Conformity No. UZ.SMT.01.0049.98156488 dated August 29, 2023. Registered in the State Register of the Republic of Uzbekistan. Valid until August 29, 2026.
Type approval certificate of measuring instruments No. 01.0038-son dated August 28, 2023 Issued by Agency for Standardization, Metrology and Certification of the Republic of Uzbekistan. Valid until August 28, 2028.

Warranty period - 2 years

Calibration interval - 2 years

"M-CONTROL"  

Contacts:

Tashkent
Yakkasaray district, Shota Rustaveli, 45

+998 (33) 778 77 78